Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 34
Caution! NVRAM_CLR, Attempt Failed
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Table 1-8. System Messages (continued) Message Causes Corrective Actions Attempting to update Remote Configuration. Please wait... Remote Configuration Wait until the process is request has been detected complete. and is being processed. BIOS Manufacturing System is in mode detected. manufacturing mode. MANUFACTURING MODE will be cleared before the next boot. System reboot required for normal operation. Reboot to take the system out of manufacturing mode. BIOS Update Attempt Failed! Remote BIOS update attempt failed. Retry the BIOS update. If the problem persists, see "Getting Help" on page 179. Caution! NVRAM_CLR NVRAM_CLR jumper is jumper is installed. CMOS has installed on been cleared. system board. Remove the NVRAM_CLR jumper. See Figure 6-1 for jumper locations. CPUs with different cache sizes detected! Microprocessors with different cache sizes are installed. Ensure that all microprocessors have the same cache size and that they are properly installed. See "Processors" on page 98. Decreasing available memory Faulty or improperly installed memory modules. See "Troubleshooting System Memory" on page 156. 34 About Your System