Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 90
When the front of the card is fully seated, the plastic standoff snaps over,
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Figure 3-18. Installing and Removing a NIC Daughter Card 3 4 2 1 5 6 1 retention standoff (2) 3 retention standoff holes (2) 5 support standoff 2 NIC daughter card connector 4 NIC daughter card 6 cutout 5 Straighten the card so that the cutouts on the side edges of the card insert into the two support standoffs. See Figure 3-18. 6 Slide the card back slightly and align the front edge of the NIC card with the two front plastic retention standoffs adjacent to the system board connector, and press down the side of the card until it is fully seated. See Figure 3-18. When the front of the card is fully seated, the plastic standoff snaps over the edge of the card. 7 If applicable, reinstall the expansion cards in slots 6 and 7. See "Installing an Expansion Card" on page 78. 90 Installing System Components