Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 37
Table 1-8., System Messages, Message, Causes, Corrective Actions, See Using the System
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Table 1-8. System Messages (continued) Message Causes Corrective Actions Memory tests terminated by keystroke. POST memory test terminated by pressing the spacebar. Information only. No boot device available Faulty or missing optical drive subsystem, hard drive, or hard-drive subsystem, or no boot disk in drive A. Use a bootable diskette, CD, or hard drive. If the problem persists, see "Troubleshooting an Optical Drive" on page 158, and "Troubleshooting a Hard Drive" on page 159. See "Using the System Setup Program" on page 43 for information about setting the order of boot devices. No boot sector on hard drive Incorrect configuration settings in System Setup program, or no operating system on hard drive. Check the hard-drive configuration settings in the System Setup program. See "Using the System Setup Program" on page 43. If necessary, install the operating system on your hard drive. See your operating system documentation. No timer tick interrupt Faulty system board. See "Getting Help" on page 179. Optical drive not Cable is not properly See "Troubleshooting an found seated, or drive is missing. Optical Drive" on page 158. About Your System 37