Dell PowerEdge R905 Hardware Owner's Manual (PDF) - Page 116
Support the battery connector by pressing down firmly on the positive
View all Dell PowerEdge R905 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 116 highlights
4 Remove the cooling shroud assembly. See "Removing the Cooling Shroud Assembly" on page 69. 5 Locate the battery socket. See Figure 6-1. NOTICE: If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the object. Ensure that the object is inserted between the battery and the socket before you attempt to pry out the battery. Otherwise, you may damage the system board by prying off the socket or by breaking circuit traces on the system board. NOTICE: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 6 Remove the system battery. See Figure 3-27. a Support the battery connector by pressing down firmly on the positive side of the connector. b While supporting the battery connector, press the battery toward the positive side of the connector and pry it up out of the securing tabs at the negative side of the connector. Figure 3-27. Replacing the System Battery 1 2 3 1 positive side of battery connector 3 negative side of battery connector 2 system battery NOTICE: To avoid damage to the battery connector, you must firmly support the connector while installing or removing a battery. 116 Installing System Components