HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 178

Message INSTALL SUPPLIES Type Error LINEFEED CALIBRATION FAILED Warning LOADING PROGRAM XX Status LOAD TRAY XX Error [TYPE] [SIZE] MANUALLY FEED Error [TYPE] [SIZE] NO JOB TO CANCEL Status Description At least one supply is missing or is installed incorrectly in the printer, and another supply is missing, installed incorrectly, out, or low. Press (select button) for more information about specific ink cartridges and printheads. Install any missing ink cartridges and printheads. If all are installed, remove the ink cartridges and printheads. Verify that you are using the correct ink cartridges and printheads, and then firmly reinsert them into the printer. You might need to repeat this several times. Be prepared to replace the specific ink cartridges and/or printheads with new ink cartridges and/or printheads. For more information about ink cartridges and printheads, see "Ink cartridges" and "Printheads," or visit http://www.hp.com. The linefeed calibration has failed. Make sure plain letter or A4 paper is loaded in the printer, and then start the linefeed calibration from the LCD control panel. For more information, see "Calibrating linefeed." Fonts and programs are being loaded into the system RAM. Do not turn off printer. Tray XX is configured for a specific media type and size required for a print job that has been sent, but the tray is empty. Load the specified media type and size into Tray XX. To override this message and use a media type and size that is available in another tray, press (select button). The print job requires a specific media type and size that is not currently available, or the print job has specified the Tray 1 as the source tray. Load the specified media type and size into Tray 1. To override this message and use a media type and size that is available in another tray, press (select button). (cancel job button) has been pressed, but there are currently no print jobs in the queue to cancel. B-8 ENWW