HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 40

Additional printer memory and font DIMMs Note If you often print complex graphics or PostScript emulation documents, or if you print with the optional auto-duplex unit, you might want to add more memory to the printer. You can also install a font DIMM to print languages such as Japanese or Korean. Adding memory to the printer will allow it to process more complex PostScript emulation and PCL 5c and PCL 6 jobs, but it might not increase processing speed. To find out how much memory is installed in the printer, print a configuration page. See "Printing a Configuration page." EIO hard disk drive An EIO hard disk drive can be used for print job storage, and to permanently store downloaded fonts and forms in the printer. Unlike standard printer memory, items on the EIO hard disk drive remain in the printer even when the printer is turned off. For information about ordering an EIO hard disk drive, see "Memory/ storage accessories." For information about installing and using an EIO hard disk drive, see the documentation provided with the EIO hard disk drive. Installing memory and font DIMMs The printer is shipped with 64 MB of memory on the formatter and 24 MB of memory on the printer base. The printer has three dual inline memory module (DIMM) slots that accept 64 or 128 MB RAM each or 4 MB flash DIMMs. The printer can support up to 344 MB of memory (including the 24 MB on the printer base). This additional memory is available for purchase as an accessory. For more information, see "Ordering supplies and accessories." You can also follow this procedure to install third-party customized solutions. 3-8 ENWW