HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 61

Note Message IPX/SPX APPLETALK DLC/LLC LINK SPEED Value or Submenu Description ENABLE FRAME TYPE This item enables the IPX/SPX menu, which you can use to set the IPX/SPX protocol parameters. In the IPX/SPX menu, you can specify the frame type parameter used on your network. The default is AUTO, which automatically sets and limits the frame type to the one detected. For Ethernet cards, frame type selections include EN_8023, EN_II, EN_8022, and EN_SNAP. For Token Ring cards, frame type selections include TR_8022 and TR_SNAP. In the IPX/SPX menu for Token Ring cards, you can also specify NetWare Source Routing parameters, which include SRC RT=AUTO (default), OFF, SINGLE R, or ALL RT. ENABLE This item allows you to enable or disable the AppleTalk protocol. ENABLE This item allows you to enable or disable the DLC/LLC protocol. LINK SPEED This item allows you to manually set the link speed (10 or 100 Mbs). Resetting the HP Jetdirect print server Resetting the HP Jetdirect print server restores the factory default values of the Jetdirect print server. When you restore the factory default values for the HP Jetdirect print server, all previously stored EIO settings are lost. To reset the HP Jetdirect print server 1 Press and hold (power button) to turn off the printer. 2 While holding down both (select button) and (pause/resume button) on the LCD control panel, turn on the printer. ENWW 4-19