HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 65
Setting the link speed, To manually access TCP/IP parameters, To set the link speed
View all HP 3000dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
To manually access TCP/IP parameters 1 Press (select button) on the LCD control panel to enter the menus. 2 Press (down arrow button) to highlight CONFIGURE DEVICE, and then press (select button). 3 Press (down arrow button) to highlight I/O, and then press (select button). 4 Press (down arrow button) to highlight EIO X (where X = 1 or 2), and then press (select button). 5 Press (down arrow button) to select the parameter you want to configure, and then press (select button). 6 Press (down arrow button) or (up arrow button) to highlight the option you want to select, and then press (select button). 7 To configure other parameters, press (back button) repeatedly to return to the CONFIGURE DEVICE menu, and then repeat steps 1 through 6. -Or- To return to the READY state, press (pause/resume button). 8 Repeat steps 3-7 to configure other parameters. Setting the link speed By factory default, the link speed is set to AUTO. Use the following procedure to set a specific speed and communication mode. To set the link speed 1 Press (select button) on the LCD control panel to enter the menus. 2 Press (down arrow button) to highlight CONFIGURE DEVICE, and then press (select button). 3 Press (down arrow button) to highlight I/O, and then press (select button). 4 Press (down arrow button) to highlight EIO X (where X = 1 or 2), and then press (select button). 5 Press (down arrow button) to highlight LINK SPEED, and then press (select button). ENWW 5-3