HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 37
Step 1: Install the HP Jetdirect print server
View all HP 3000dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Step 1: Install the HP Jetdirect print server CAUTION The HP Jetdirect print server contains electronic components that can be damaged by static electricity. To prevent buildup of static electricity, maintain frequent contact with any bare sheet metal surface on the printer. If possible, wear a grounding wrist strap (or similar device). Handle the print server carefully at all times. Avoid touching electronic components or circuit paths. 1 Press and hold (power button) to turn off the printer, and then unplug the power cord. 2 Use a Phillips head screwdriver to loosen and remove the two retaining screws holding the cover for the empty EIO slot onto the printer. Remove the cover. You will not need these screws and cover again. 3 Firmly insert the HP Jetdirect print server into the EIO slot. 4 Insert and tighten the retaining screws that came with the HP Jetdirect print server. 5 Connect the network cable to the HP Jetdirect print server. ENWW 3-5