HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 64
Configuring TCP/IP parameters, To set the Novell NetWare frame type
View all HP 3000dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
To set the Novell NetWare frame type 1 Press (select button) on the LCD control panel to enter the menus. 2 Press (down arrow button) to highlight CONFIGURE DEVICE, and then press (select button). 3 Press (down arrow button) to highlight I/O, and then press (select button). 4 Press (down arrow button) to highlight EIO X (where X = 1 or 2), and then press (select button). 5 Press (down arrow button) to highlight IPX/SPX, and then press (select button). 6 Press (down arrow button) to highlight FRAME TYPE, and then press (select button). 7 Press (down arrow button) to highlight the desired frame type, and then press (select button). 8 To return to the READY state, press (pause/resume button). Configuring TCP/IP parameters You can use the LCD control panel to configure the following TCP/IP parameters: z Usage of BOOTP or DHCP for configuration parameters z IP address (4 bytes) z Subnet mask (4 bytes) z Default gateway (4 bytes) z Syslog server z Idle TCP/IP connection timeout (in seconds) 5-2 ENWW