HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 60

Eio Menu, Tcp/ip, Enable, Con Method, Bootp=yes, Dhcp=yes, Bootp=no, Dhcp=no

Page 60 highlights

EIO menu Note The EIO (enhanced input/output) menu appears only when an EIO device is installed (such as an HP Jetdirect print server). If the printer contains an HP Jetdirect print server, you can configure basic networking parameters using the EIO menu. Network printer administrators can also use HP Web Jetadmin to configure these and other parameters remotely. The items available on the menu vary depending on the particular print server that is installed. Message TCP/IP Value or Submenu ENABLE CONFIGURE METHOD Description This item allows you to enable or disable the TCP/IP menu and set the TCP/IP protocol parameters. In the TCP/IP menu, you can specify BOOTP=YES or DHCP=YES for TCP/IP parameters to be automatically configured by a BootP or DHCP server when the printer is turned on. If you specify BOOTP=NO and DHCP=NO, you can manually set the following TCP/IP parameters from the LCD control panel: z Each byte of the IP address (IP) z Subnet Mask (SM) z Syslog Server (LG) z Default Gateway (GW) z Idle Timeout period (default is 270 seconds; 0 disables the timeout) When setting IP numbers, press (up arrow button) to increase the number by 1. Press (down arrow button) to decrease the number by 1. Press (select button) to make your selection. 4-18 ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198

4-18
ENWW
EIO menu
The EIO (enhanced input/output) menu appears only when an EIO
device is installed (such as an HP Jetdirect print server). If the printer
contains an HP Jetdirect print server, you can configure basic
networking parameters using the EIO menu. Network printer
administrators can also use HP Web Jetadmin to configure these and
other parameters remotely.
Note
The items available on the menu vary depending on the particular
print server that is installed.
Message
Value or
Submenu
Description
TCP/IP
ENABLE
CONFIGURE
METHOD
This item allows you to enable or
disable the TCP/IP menu and set the
TCP/IP protocol parameters.
In the TCP/IP menu, you can specify
BOOTP=YES
or
DHCP=YES
for TCP/IP
parameters to be automatically
configured by a BootP or DHCP server
when the printer is turned on.
If you specify
BOOTP=NO
and
DHCP=NO
, you can manually set the
following TCP/IP parameters from the
LCD control panel:
Each byte of the IP address (IP)
Subnet Mask (SM)
Syslog Server (LG)
Default Gateway (GW)
Idle Timeout period (default is 270
seconds; 0 disables the timeout)
When setting IP numbers, press
(up
arrow button) to increase the number
by 1. Press
(down arrow button) to
decrease the number by 1. Press
(select button)
to make your selection.