HP 3000dtn HP Business Inkjet 3000 series printers - (English) User Guide - Page 66
Disabling network protocols (optional), To disable network protocols
View all HP 3000dtn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
6 Press (down arrow button) or (up arrow button) to highlight the desired link speed, and then press (select button). 7 To return to the READY state, press (pause/resume button). Disabling network protocols (optional) Note By factory default, all supported network protocols are enabled. Disabling unused protocols has the following benefits: z It decreases printer-generated network traffic. z It prevents unauthorized users from printing to the printer. z It provides only pertinent information on the configuration page. z It allows the LCD control panel to display protocol-specific error and warning messages. To disable network protocols Do not disable the IPX/SPX protocol if Windows 98, Windows NT, Windows Millennium Edition, Windows 2000, or Windows XP users will be printing to the printer. 1 Press (select button) on the LCD control panel to enter the menus. 2 Press (down arrow button) to highlight CONFIGURE DEVICE, and then press (select button). 3 Press (down arrow button) to highlight I/O, and then press (select button). 4 Press (down arrow button) to highlight EIO X (where X = 1 or 2), and then press (select button). 5 Press (down arrow button) to highlight the network protocol you want to disable, and then press (select button). 6 Press (down arrow button) to highlight ENABLE, and then press (select button). 7 Press (down arrow button) to highlight OFF, and then press (select button). 8 Press (pause/resume button) to return to the READY state. 5-4 ENWW