HP xw8600 HP xw8600 Workstation Service and Technical Reference Guide - Page 85
Installing a memory module, DIM slot identification, Required system board DIMM installation order
View all HP xw8600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
4. Push gently outward on the socket levers (1) as shown in the following figure. Figure 4-24 Removing a memory module 5. Lift the DIMM straight up and out of the socket (2), then store the DIMM in an antistatic bag. Installing a memory module This section presents system board memory module installation information. DIM slot identification The following illustration identifies the system board memory slots: Figure 4-25 Identifying DIMM slots Required system board DIMM installation order Use the figure below as a guide for installing memory: ● If installing only one DIMM, install it in socket 1. ● If installing only two DIMMs, install them in socket pair: 1/5. ENWW Removing and replacing components 75
4.
Push gently outward on the socket levers (1) as shown in the following figure.
Figure 4-24
Removing a memory module
5.
Lift the DIMM straight up and out of the socket (2), then store the DIMM in an antistatic bag.
Installing a memory module
This section presents system board memory module installation information.
DIM slot identification
The following illustration identifies the system board memory slots:
Figure 4-25
Identifying DIMM slots
Required system board DIMM installation order
Use the figure below as a guide for installing memory:
●
If installing only one DIMM, install it in socket 1.
●
If installing only two DIMMs, install them in socket pair: 1/5.
ENWW
Removing and replacing components
75