Panasonic KX-NT400 Operating Instructions - Page 111
Basic Information, Camera RTSP Port Number MPEG4 Only
View all Panasonic KX-NT400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Customizing the Telephone Camera RTSP Port Number (MPEG4 Only) Enter the port number that the camera uses for RTSP communication. This setting is only necessary if the camera uses the MPEG4 codec. • Default value: 554 • Value range: 1-65535 Note • Consult your administrator to obtain the correct values for the camera settings. Page 2/3-Camera Information 1 Door Use the Door contact type for doorphones. Page 1/3-Basic Information Camera Address Enter the IP address of the door's camera. Press Test to verify the connection to the camera. • Must be a valid IP address Camera Login Code Enter the login code for the door's camera. • Maximum 15 characters Camera Password Enter the login password for the door's camera. • Maximum 15 characters Page 3/3-Camera Information 2 Door Phone Name (required) Enter the name to assign for the door phone. • Maximum 32 characters Door Phone Number (required) Enter the number of the doorphone. • Maximum 2 digits • Allowed characters: *, #, P (pause), 0-9 Note • • If you enter only 1 digit in Door Phone Number, a 0 is added to the beginning of the number automatically. For example, "5" is changed to "05". Valid doorphone numbers vary according to the connected PBX. Camera HTTP Port Number Enter the port number that the camera uses for HTTP communication. • Default value: 80 • Value range: 1-65535 Camera Codec Select the codec that the door's camera uses to encode video. • Select Motion JPEG or MPEG4. • Default value: Motion JPEG Camera RTSP Port Number (MPEG4 Only) Enter the port number that the camera uses for RTSP communication. This setting is only necessary if the camera uses the MPEG4 codec. • Default value: 554 • Value range: 1-65535 Document Version 2010-01 Operating Instructions 111