Panasonic KX-NT400 Operating Instructions - Page 168
Initializing the KX-NT400, Automatic Restarting, Manual Restarting System Reset
View all Panasonic KX-NT400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Installation and Settings Chat Log (Export Only) Select the check box to export the chat log. For details about the chat log, see "Chat (Page 83)". Note SD Memory Card Information Confirm the following before using an SD memory card. • A compatible card is inserted (see "Compatible SD Memory Cards (Page 181)"). • The SD memory card has been formatted using the correct format (see "Formatting SD Memory Cards (Page 182)"). • The SD memory card is not locked (see "Write Protection (LOCK) (Page 181)"). • Data stored on SD memory cards can be corrupted if the card is exposed to electromagnetic fields, static electricity, etc. We recommend to back up important data stored on SD memory cards. • The KX-NT400 cannot delete the contents of the SD memory card unless you format it. Use computers to individually delete the contents of an SD memory card. Initializing the KX-NT400 You can initialize the KX-NT400 to reset all settings to their default values. This feature is only accessible from the Setup screen. For details about initializing the KX-NT400, see "Setting Initialize (Page 165)". Restarting the KX-NT400 Automatic Restarting When you change certain settings, the KX-NT400 restarts automatically. On the Setup screen During the setup procedure, when you change settings on the following screens, the KX-NT400 automatically restarts after you press Close on the Setup screen. • Language Settings (Page 159) • IP Address Settings (Page 159) • IP Port Settings (Page 160) • Quality of Service (QoS) Settings (Page 161) • Firmware Version Update (Page 163) • Setting Initialize (Page 165) Note • For details about the Setup screen, see "Setting Up the KX-NT400 (Page 157)". On the Options screen During normal use, when you change settings on either of the following screens, the KX-NT400 restarts automatically after you press OK on the respective screen. • Display Settings (Page 113)*1 • Language Settings (Page 115) *1 Restarting occurs only when Display Color is changed. Manual Restarting (System Reset) When the settings for the KX-NT400 have been changed via the PC Maintenance Console or changes have been made to the PBX's configuration, the KX-NT400 requires manual restarting. To perform a manual restart, disconnect the Ethernet cable (when using PoE) or unplug the AC adaptor from the power outlet. The KX-NT400 does not have a system reset button. Some examples of when the KX-NT400 needs to be restarted are listed below: • The Forward/Do Not Disturb settings have been changed via the PC Maintenance Console. • The presence status settings have been changed via the PC Maintenance Console. • The floating extension number of the simplified voice message system (SVM) or Panasonic Voice Processing System (VPS) has changed. In this case, make sure to set the new extension number 168 Operating Instructions Document Version 2010-01