Panasonic KX-NT400 Operating Instructions - Page 136

Customizing the Telephone Button Direct Station Selection (DSS) One-touch Dialing*2 Incoming Call Distribution Group (ICD Group) Message Message for Another Extension Description & Programming Input Used to access an extension with one touch. It is also possible to be changed to the other feature button. Programming Input + Extension no. For intercom calls, the DSS button light shows the current status as follows: • Off: The extension is idle. • Red on: Your or another extension is using the line. Used to access a desired party or system feature with one touch. Programming Input + Desired no. (max. 32 digits) Used to access a specified incoming call distribution group for making or receiving calls. Programming Input + Incoming call distribution group extension no. (+ + delayed ringing time [0-7])*3 For monitoring and changing the Log-in/Log-out status of extensions, the DSS button light shows the current status as follows: • Off: The extension is not in the group. • Green on: Log-in (Ready) mode • Flashing green: Log-in (Not Ready) mode • Red on: Log-out mode Used to leave a message waiting indication or call back the party who left the message waiting indication. Programming Input The message button light shows the current status as follows: • Off: You have no new messages. • Red on: You have new messages. Used to have a Message button for another extension. Programming Input + Extension no./Incoming call distribution group extension no. The message button light shows the current status as follows: • Off: The other extension has no messages. • Red on: The other extension has new messages. 136 Operating Instructions Document Version 2010-01