Panasonic KX-NT400 Operating Instructions - Page 112

Customizing the Telephone Note • Consult your administrator to obtain the correct values for the camera settings. Sensor Use the Sensor contact type for sensors, such as motion sensors, that are connected to the PBX. Page 1/3-Basic Information • Must be a valid IP address Camera Login Code Enter the login code for the sensor's camera. • Maximum 15 characters Camera Password Enter the login password for the sensor's camera. • Maximum 15 characters Page 3/3-Camera Information 2 Sensor Name (required) Enter the name to assign for the sensor. • Maximum 32 characters Sensor Number (required) Enter the number of the sensor. • Maximum 2 digits • Allowed characters: *, #, P (pause), 0-9 Note • • If you enter only 1 digit in Sensor Number, a 0 is added to the beginning of the number automatically. For example, "5" is changed to "05". Valid sensor numbers vary according to the connected PBX. Page 2/3-Camera Information 1 Camera HTTP Port Number Enter the port number that the camera uses for HTTP communication. • Default value: 80 • Value range: 1-65535 Camera Codec Select the codec that the sensor's camera uses to encode video. • Select Motion JPEG or MPEG4. • Default value: Motion JPEG Camera RTSP Port Number (MPEG4 Only) Enter the port number that the camera uses for RTSP communication. This setting is only necessary if the camera uses the MPEG4 codec. • Default value: 554 • Value range: 1-65535 Note • Consult your administrator to obtain the correct values for the camera settings. Camera Address Enter the IP address of the sensor's camera. Press Test to verify the connection to the camera. 112 Operating Instructions Document Version 2010-01