Panasonic KX-NT400 Operating Instructions - Page 9
Caution, Warning - ip
View all Panasonic KX-NT400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
For Your Safety For Your Safety WARNING To reduce the risk of injury, loss of life, electric shock, fire, malfunction, and damage to equipment or property, always observe the following safety precautions. Explanation of symbols The following symbols are used to classify and describe the level of hazard and injury caused when the denotation is disregarded and improper use is performed. WARNING Denotes a potential hazard that could result in serious injury or death. CAUTION Denotes a hazard that could result in minor injury or damage to the unit or other equipment. The following symbols are used to classify and describe the type of instructions to be observed. This symbol is used to alert users to a specific operating procedure that must not be performed. General Safety Do not disassemble this unit. Dangerous electrical shock could result. The unit must only be disassembled and repaired by qualified service technicians. Never attempt to insert wires, pins, etc. into the vents or other holes of this unit. To prevent possible fire or electric shock, do not expose this unit to rain or moisture. If damage to the unit exposes any internal parts, immediately disconnect the cable or cord. If the power is supplied from the network to the IP-PT [Power-over-Ethernet], disconnect the Ethernet cable. Otherwise, disconnect the AC adaptor cord. Then return this unit to a service center. This handset earpiece is magnetized and may retain small ferrous objects. The use of excessive sound volume through earphone, headphones, or headsets may cause hearing loss. Disconnect this unit from power outlet/the Ethernet cable if it emits smoke, an abnormal smell, or makes unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center. This symbol is used to alert users to a specific operating procedure that must be followed in order to operate the unit safely. Installation Do not use this unit near water, for example, near a bathtub, washbowl or sink. Damp basements should also be avoided. The unit should only be connected to a power supply of the type described in the Operating Instructions or as shown on the label on the unit. Placement Care should be taken so that objects do not fall onto, and liquids are not spilled into, the unit. Do not subject this unit to excessive smoke, dust, moisture, mechanical vibration, shock, or direct sunlight. Do not place heavy objects on top of this unit. Document Version 2010-01 Operating Instructions 9