Panasonic KX-NT400 Operating Instructions - Page 75

Basic Feature Operation 2. Press Make a conference. 3. Go on-hook. The other conference participants can continue talking. Note • When you leave a conference, the status of the first conference participant changes to (on hold). The statuses of the other parties do not change. To return to a conference 1. On the Calls screen, select the call on hold. 2. Press Retrieve the Call. Locking Operations (Application Lock) The Application Lock feature lets you restrict operation to only a few operation screens. When you set the Application Lock, you can still access some screens, such as the HOME and Calls screens. If you try to access a screen that is locked, you will be prompted for a password to turn off Application Lock. To use the Application Lock, you must enable the Application Lock feature. For details, see "Password Settings (Page 113)". To set the Application Lock 1. On the HOME screen, press . -or- Go off-hook. Usage tips • When a conference call includes more than 1 internal call, you can also return to the conference by simply going off-hook. To cancel the Application Lock 1. On the HOME screen, press , or access a screen that is locked. 2. On the Unlock Application window, enter the Application Lock password. To leave a conference and not be able to return 1. Press (TRANSFER). 2. Go on-hook. Note • To leave a conference call involving two outside parties and have the conversation continue, your extension must be enabled to transfer calls to CO lines through COS programming. 3. Press OK. Note • If you enter the wrong password a pre-programmed number of times, your extension will become locked. To unlock your extension, the PIN and PIN lock for your extension must be cleared. For details, consult your manager. Document Version 2010-01 Operating Instructions 75