Panasonic KX-NT400 Operating Instructions - Page 161

Installation and Settings 2 that the KX-NT400 will use to communicate over the network. Quality of Service (QoS) Settings To establish voice communications between the telephones, the primary port of the KX-NT400 and the connected PBX must belong to the same VLAN. Consult your administrator for details about the correct values. PTAP Server Enter the port number for the PTAP server. • Default: 9300 PTAP Client Enter the port number for the KX-NT400 to use for PTAP communication. • Default: 9301 Note • • You can reset the settings to their default values by pressing Reset to Default. Consult your administrator for more details. QoS Setting screen (1/2) Select whether to enable communication over a VLAN in the network. If you enable VLAN communication, enter the VLAN IDs and VLAN priorities for Primary Port and Secondary Port. VLAN Select whether to use VLAN to enhance the network traffic controlling. • Default: Disable Primary Port VLAN ID Enter the VLAN ID number to which the PBX belongs. • Default: 1 VLAN Priority Enter the priority for the VLAN. • Default: 7 Secondary Port VLAN ID Enter the VLAN ID number to which the PBX belongs. • Default: 2 VLAN Priority Enter the priority for the VLAN. • Default: 0 Note • The KX-NT400 is equipped with 2 IP ports. Therefore it is possible to place the primary and Document Version 2010-01 Operating Instructions 161