Samsung SGH-T889 User Manual Ver.lj1_f8 (English(north America)) - Page 229

- Press the RESET button on the hub for ONE second until the LED turns BLUE. - Tap the entry from your device's AllShare Cast screen and confirm connection. Important! The AllShare Cast Hub is a 1-to-1 connection. If a previous device was paired to the Hub and is still connected to the AllShare Cast Hub, you can not pair a new device until the first connection is stopped. • I have a new device and the hub is connected but it doesn't show up in my list: • Force the hub to disconnect from any previously paired devices: - Press and hold the RESET button (on the back of the hub), for about FOUR seconds until the LED begins to blink RED. - Access your new device's AllShare Cast screen and rescan for the existing hub/dongle. - Press the RESET button on the hub for ONE second until the LED turns BLUE. - Tap the entry from your device's AllShare Cast screen and confirm connection. AllShare Cast Hub - Streaming Videos The hub supports streaming of purchased media content that contains DRM (Digital Rights Management). Note: You can control the volume level of your playback file being shown on your TV by using your device's Volume buttons. For additional volume, use your TV's volume controls. To stream video content to your Tv via AllShare Cast Hub: 1. Connect your AllShare Cast Hub to your TV. For more information, refer to "Connecting AllShare Cast Hub" on page 220. 2. Verify your TV is set to the same source as your hub and that you can see the on-screen connection and configuration tutorials. 3. On your device, press ➔ and then tap Settings ➔ More settings ➔ AllShare Cast. Multimedia 223