Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 114

HD-SDI OUTPUT or HDMI OUTPUT connectors., through [thru]

Get Sony XDSPD2000 PDF manuals and user guides View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 114 highlights

Menu items in the 700s, relating to video control Item number 723 726 728 731 Item name INPUT VIDEO BLANKING Sub-item 1 ALL LINE 2 LINE12| LINE20 10 In 59.94i/59.94P/ 29.97P mode 2 LINE9| LINE22 15 In 50i/50P/25P mode H BLANKING WIDTH a) OUTPUT SCH PHASE a) WIDE MODE a) Sub-item 1 INPUT 2 OUTPUT Settings Switch blanking on or off for lines in the vertical blanking interval of input video signals. Lines can be specified individually. Y/C signals and odd/ even fields are blanked simultaneously. Blanking in recorded signals is carried out according to these settings. ---: Specify the blanking for each line separately blank [blnk]: Regardless of the settings of other sub-items, blank all lines which can be specified in this menu item. throu [thru]: Regardless of the settings of other sub-items, switch blanking off for all lines which can be specified in this menu item. Specify blanking for lines 12 to 20. blank [blnk]: Switch blanking on. throu [thru]: Switch blanking off. Specify blanking for lines 9 to 22. blank [blnk]: Switch blanking on. throu [thru]: Switch blanking off. Select the horizontal blanking width of the output analog video signal. narrow [narow]: Digital blanking (narrow) wide: Analog blanking (wide) When "wide" is selected, the horizontal blanking width complies with SMPTE-170M, and normally the blanking is widened and the image becomes narrower. It is recommended to select "narrow" at the editing stage, then later, for broadcast transmission to select "wide", to output a signal conforming to the standard. Note, however, that "narrow" has to be always selected for SDI signals. Set the subcarrier H phase. -512 to 0 to 511 Specify whether to record and play back with the addition of wide picture information. Select whether to save wide picture information when recording. auto: Automatically save wide picture information when it is detected in the selected input video signal. on: Always save wide picture information. off: Never save wide picture information Select whether to add wide picture information to the signal output when down-converter output is set to squeeze mode. through [thru]: Do not add. auto: Add. 740 MASTER LEVEL (HD) b) 741 Y LEVEL (HD) b) Notes • To add wide picture information to the output signal, another setting is required in addition to this item. In setup menu item 703, set line 16 (59.94i/59.94P/29.97P mode (J)), line 20 (59.94i/59.94P/29.97P mode (UC)), or line 23 (50i/25P mode) to "throu". • In 59.94i/59.94P/29.97P mode (J), output of wide picture information is given priority if the VITC insertion line is set to line 16 in setup menu item 601 or 602. • In 59.94i/59.94P/29.97P mode (UC), output of wide picture information is given priority if the VITC insertion line is set to line 20 in setup menu item 601 or 602. Adjust the high-definition video signal output from the HD-SDI OUTPUT or HDMI OUTPUT connectors. This adjusts the Y, PB, and PR levels simultaneously. -2048 to 0 to 846 Adjust the Y level of the high-definition video signal output from the HD-SDI OUTPUT or HDMI OUTPUT connectors. -2048 to 0 to 846 Chapter 7 Menus 114 Setup Menu

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
114
Setup Menu
Chapter 7
Menus
723
INPUT VIDEO BLANKING
Switch blanking on or off for lines in the vertical blanking interval of input
video signals. Lines can be specified individually. Y/C signals and odd/
even fields are blanked simultaneously.
Blanking in recorded signals is carried out according to these settings.
Sub-item
1
ALL LINE
---
:
Specify the blanking for each line separately
blank [blnk]:
Regardless of the settings of other sub-items, blank all
lines which can be specified in this menu item.
throu [thru]:
Regardless of the settings of other sub-items, switch
blanking off for all lines which can be specified in this menu item.
2
|
10
LINE12-
LINE20
In 59.94i/59.94P/
29.97P mode
Specify blanking for lines 12 to 20.
blank [blnk]:
Switch blanking on.
throu [thru]
:
Switch blanking off.
2
|
15
LINE9-
LINE22
In 50i/50P/25P
mode
Specify blanking for lines 9 to 22.
blank [blnk]:
Switch blanking on.
throu [thru]
:
Switch blanking off.
726
H BLANKING WIDTH
a)
Select the horizontal blanking width of the output analog video signal.
narrow [narow]
: Digital blanking (narrow)
wide
: Analog blanking (wide)
When “wide” is selected, the horizontal blanking width complies with
SMPTE-170M, and normally the blanking is widened and the image
becomes narrower. It is recommended to select “narrow” at the editing
stage, then later, for broadcast transmission to select “wide”, to output a
signal conforming to the standard. Note, however, that “narrow” has to
be always selected for SDI signals.
728
OUTPUT SCH PHASE
a)
Set the subcarrier H phase.
–512 to 0
to 511
731
WIDE MODE
a)
Specify whether to record and play back with the addition of wide picture
information.
Sub-item
1
INPUT
Select whether to save wide picture information when recording.
auto
:
Automatically save wide picture information when it is detected in
the selected input video signal.
on:
Always save wide picture information.
off:
Never save wide picture information
2
OUTPUT
Select whether to add wide picture information to the signal output when
down-converter output is set to squeeze mode.
through [thru]
:
Do not add.
auto:
Add.
Notes
•
To add wide picture information to the output signal, another setting is
required in addition to this item. In setup menu item 703, set line 16
(59.94i/59.94P/29.97P mode (J)), line 20 (59.94i/59.94P/29.97P mode
(UC)), or line 23 (50i/25P mode) to “throu”.
•
In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if the VITC insertion line is set to line 16 in setup menu
item 601 or 602.
•
In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if the VITC insertion line is set to line 20 in setup menu
item 601 or 602.
740
MASTER LEVEL (HD)
b)
Adjust the high-definition video signal output from the HD-SDI OUTPUT
or HDMI OUTPUT connectors. This adjusts the Y, PB, and PR levels
simultaneously.
–2048 to 0
to 846
741
Y LEVEL (HD)
b)
Adjust the Y level of the high-definition video signal output from the
HD-SDI OUTPUT or HDMI OUTPUT connectors.
–2048 to 0
to 846
Menu items in the 700s, relating to video control
Item number
Item name
Settings