Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 117
Byte [188B], 204Byte [204B]
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Menu items in the 900s, relating to digital process Item number Item name 926 DVB-ASI SETTING a) b) Sub-item 1 I/O MODE 2 TS MODE c) 3 ENC RATE(Mbps) 4 RESOLUTION c) 5 PROGRAM NUMBER 6 OUTPUT MODE 7 PACKET LENGTH 8 META PACKET OUT 9 PID(PMT) Settings Sets the parameters for DVB-ASI output, and specifies the number of the program to receive when DVB-ASI signals are input. Sets DVB-ASI input /output. input [in]: Fixed input mode output [out]: Fixed output mode Selects the TS mode. (59.94i/29.97P/50i/25P mode only). HDV: HDV mode Manual [manu]: Encoding rate mode Sets the encoding rate. 15.00Mbps to 25.00 to 43.25Mbps: Sets the encoding rate. You can set the rate in units of 0.01 Mbps (or units of 0.20 Mbps, when the SHIFT button is held down). - - -: When sub item TS MODE of menu item 926 is set to "HDV". Selects the number of horizontal pixels for the 1080i format. (59.94i/ 29.97P/50i/25P mode only). 1440: 1440 When sub-item TS MODE of menu item 926 is set to "HDV", this is fixed as "1440". When the encoding rate is set to lower than 35.00 Mbps with subitem ENC RATE(Mbps), this is also fixed as "1440". 1920: 1920 Specifies a DVB-ASI input/output signal program number. 1 to 100 to 65535: Sets the program number (decimal). You can set this in units of 1 (or 20 when the SHIFT button is held down). - - -: When sub item TS MODE of menu item 926 is set to "HDV". Selects the output mode. Packet [packt]: Packet mode Burst: Burst mode Selects the packet length. 188Byte [188B]: 188 bytes 204Byte [204B]: 204 bytes Specifies output of DVB-ASI TS signal metadata packets. on: Output metadata packets. off: Do not output metadata packets - - -: When sub item TS MODE of menu item 926 is set to "HDV". Changes the PMT packet PID value for DVB-ASI output. 30 to 81 to 1FFE: Set PID value (as a hexadecimal value). You can set the value in 1 units (or 20 units, when the SHIFT button is held down). - - -: When sub item TS MODE of menu item 926 is set to "HDV". 10 PID(PCR) Note Do not use the same PID value as for any other sub-item. Changes the PCR packet PID value for DVB-ASI output. 30 to 134 to 1FFE: Set PID value (as a hexadecimal value). You can set the value in 1 units (or 20 units, when the SHIFT button is held down). - - -: When sub item TS MODE of menu item 926 is set to "HDV". Note Do not use the same PID value as for any other sub-item. Chapter 7 Menus Setup Menu 117