Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 58
Editing operations, Preread editing, Carrying out clip editing
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Chapter 4 Recording, Playback and Copying Editing operations Notes • When the IN and OUT points are not set in the same clip, insert editing is performed only for the clip containing the IN point. For preread editing, set "PREREAD" on page P5 OTHER of the function menu to ON (see page 48). Audio source Clip 1 Clip 2 IN point OUT point Edit execution segment Digital or analog audio output Audio mixer Digital or analog audio input • If the OUT point is set within the final clip, in assemble editing the length of the clip does not change. Carrying out clip editing To carry out clip editing, use an RM-280 or similar editing controller. Requirements for use of editing controllers Model name RM-280 RM-450 Requirement Software version: 2.04 or higher Set to player synchronization For details of how to set edit points and carry out editing, refer to the operation manual for the editing controller. Note Compared to linear editing on VTRs, a longer time is required for processing at the end of an edit (from 4 to 5 seconds are required for completion of the edit after passing the OUT point). Essence marks recorded by clip editing "CUT" is recorded as an essence mark at the IN and OUT points of video insert editing, and at the IN point of assemble editing. Preread editing Video and digital audio signals already recorded on the disc can be used as an edit source for insert editing. This type of editing is called "preread editing". The signals read out can be send to a mixer for mixing, and can be recorded either on the original channels or on other digital audio channels. Digital video output Digital video input Video switcher Video source Notes • In preread editing, an I/O feedback loop may occur if an input video signal is used as the reference signal. To prevent this, set OUT REF on the HOME page of the function menu to "REF" (see page 46). This selects use of an external reference signal during preread editing. • When preread mode is selected, no E-E video is output, regardless of the editing mode of this unit. This is to prevent feedback due to loop connections. However, feedback can occur when E-E video is output after preread editing ends and PREREAD is set to "OFF", if input and output are still connected on the same channel. To prevent feedback, select PB (playback) signals for all video and audio signals and all editing modes before starting preread editing. Do this by selecting "PB" in step 1 of the following procedure. 1 Set PB/EE on page P5 OTHER of the function menu to "PB". 2 Set PREREAD on page P5 OTHER of the function menu to "ON" (see page 48). 58 Linear Editing