Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 119
HEX to 20 HEX, 6MHz, 3.4MHz
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Menu items in the 900s, relating to digital process Item number Item name 938 LEVEL DEPEND THRESHOLD (DC) a) 939 H DETAIL FREQUENCY (DC) a) 940 H/V RATIO (DC) a) 942 V FILTER SELECT (DC) a) c) 943 CROSS COLOR CRISP (DC) a) 944 D/C LEGALIZE (DC) 950 UP CONVERTER MODE a) 951 H CROP POSITION (UC) a) 952 LETTER BOX POSITION (UC) a) 953 UP CONVERTER PROCESS a) 954 DETAIL GAIN (UC) a) 955 LIMITER (UC) a) 956 CRISP THRESHOLD (UC) a) 957 LEVEL DEPEND THRESHOLD (UC) a) 958 H DETAIL FREQUENCY (UC) a) 959 H/V RATIO (UC) a) Settings Adjust the down-converter image enhancer. Set the luminance range for edge enhancement. 0 to 8 to FH Adjust the down-converter image enhancer. Set the central frequency for edge enhancement. 2.6MHz, 3.4MHz, 3.9MHz, 4.6MHz Adjust the down-converter image enhancer. Set the horizontal/vertical ratio for edge enhancement. 0 to 3 to 7 Set the vertical interpolation filter coefficient for down-converter output (in 1080 mode only). If the setting value is large, the vertical resolution is high. 1 to 3 Set the cross color crisp level for down-converter output. 0 to 4 to FH For down converter output, selects whether to suppress signals with levels that are lower than the pedestal level. off: Do not suppress signals lower than the pedestal level. on: Suppress signals lower than the pedestal level. Select the up-converter mode. EDGE CROP [CROP]: Select the edge crop mode. LETTER BOX [L-BOX]: Select the letter box mode. SQUEEZE [SQUEZ]: Select the squeeze mode. Adjust the H-crop (the horizontal position when cropping in the edge crop mode) of the up-converter output when menu item 950 is set to "EDGE CROP". -120 to 0 to 120 When menu item 950 is set to "LETTER BOX", adjust the vertical position where the picture is cut out for up-converter output in letter box mode. -120 to 0 to 120 Select the source picture to use in converting SD to HD. FIELD: Use field pictures. ADAPTIVE [ADAPT]: Frame or field is selected automatically. Adjust the up-converter image enhancer. Adjust the sharpness of edge enhancement. 00 (HEX) to 40 (HEX) to 7F (HEX) Adjust the up-converter image enhancer. Set the maximum detail level added to emphasize the original signal. 00 (HEX) to 20 (HEX) to 3F (HEX) Adjust the up-converter image enhancer. Set the threshold amplitude for emphasis (signals of amplitude lower than the threshold are not emphasized). 00 (HEX) to 08 (HEX) to 0F (HEX) Adjust the up-converter image enhancer. Set the luminance range for edge enhancement. 00 (HEX) to 08 (HEX) to 0F (HEX) Adjust the up-converter image enhancer. Set the center frequency and frequency properties for edge enhancement. 3.2MHz: 3.2 MHz ±1.1 MHz 4.5MHz: 4.5 MHz ±1.4 MHz 5.0MHz: 5.0 MHz ±0.7 MHz 4.0MHz: 4.0 MHz ±2.0 MHz Adjust the up-converter image enhancer. Set the horizontal/vertical ratio for edge enhancement. 00 (HEX) to 03 (HEX) to 07 (HEX) Chapter 7 Menus Setup Menu 119