Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 125
Gbps FullDuplex [1G F], 100Mbps HalfDuplex [100 H]
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Item M48: AUTO RECALL M49: RESET ALL SETUP M4: SETUP MAINTENANCE: Items relating to the setup menu Setting Select whether to recall settings automatically from a menu bank when the system is powered on, and if so which menu bank to recall from. off: Do not recall settings from a menu bank. from BANK1 [Bank1]: Recall settings from menu bank 1. from BANK2 [Bank2]: Recall settings from menu bank 2. from BANK3 [Bank3]: Recall settings from menu bank 3. Reset all the menu settings to the factory settings. Push the SAVE function button (F5): Reset. Push the MENU button: Return to the next highest menu level without resetting. Notes • The system frequency setting is also cleared. If you execute this item, reset the system frequency (see page 31). • Date and time settings are not cleared, but the time zone setting is cleared. After executing this item, reset the time zone (see page 31). Item M50: DHCP M51: IP ADDRESS M5: NETWORK: Items relating to network settings Setting Set whether to assign an IP address automatically with the DHCP server. DISABLE [dis]: Do not assign automatically. ENABLE [ena]: Assign automatically. Set the IP address of this unit. 192.168.001.010 M52: SUBNET MASK Notes • IP address cannot be set when DHCP is set to "ENABLE". • To check the automatically acquired IP address of this unit, close the maintenance menu and then open it again. Set the subnet mask. 255.255.255.000 M53: DEFAULT GATEWAY Notes • Subnet mask cannot be set when DHCP is set to "ENABLE". • To check the automatically acquired subnet mask, close the maintenance menu and then open it again. Set the address of the default gateway. 000.000.000.000 M54: LINK SPEED M56: JUMBO FRAME a) Notes • The address of the default gateway cannot be set when DHCP is set to "ENABLE". • To check the automatically acquired address of the default gateway, close the maintenance menu and then open it again. Set the communications speed and protocol. AUTO [auto]: Sets automatically. 1Gbps FullDuplex [1G F]: 1 Gbps, full duplex 100Mbps FullDuplex [100 F]: 100 Mbps, full duplex 100Mbps HalfDuplex [100 H]: 100 Mbps, half duplex 10Mbps FullDuplex [10 F]: 10 Mbps, full duplex 10Mbps HalfDuplex [10 H]: 10 Mbps, half duplex Set the size of jumbo frames. 4088, OFF(1514) Note This value does not include the 4 bytes of the FCS (Frame Check Sequence). Chapter 7 Menus 125 Maintenance Menu