Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 20
Shuttle/jog/variable-speed playback, control VAR/JOG button
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Chapter 2 Names and Functions of Parts In VTR mode, you can monitor the input signal in E-E mode by pressing this button when in stop condition. To return to the original image, press the STOP button. Pressing this button during playback or searching will output an E-E mode image for the duration while the button is pressed. f REC INHI (recording inhibit) indicator Lights when a Professional Disc or SxS memory card is selected as the operation target media and the media is loaded in record-inhibited state (see page 49 and page 51). g STANDBY indicator Lights when the unit is put into media stop mode. After a certain time passes in a media stop mode, the unit automatically enters standby off mode and the indicator goes off. You can specify the time until the unit enters standby off mode. For details, see the description of setup menu item 501 STILL TIMER (see page 109). 7 Shuttle/jog/variable-speed playback control section 1 SHTL/JOG button 2 VAR/JOG button 3 JOG indicator 4 Jog/shuttle direction indicators d Jog/shuttle direction indicators These show the playback direction in jog, shuttle, or variable-speed mode. b (green): Lights during playback in the reverse direction. B (green): Lights during playback in the forward direction. x (red): Lights during still image display. e Shuttle/jog dial The dial switches between shuttle/variable-speed mode and jog mode each time that you press it all the way in. Shuttle/variable-speed mode: The dial is in the raised position. Jog mode: The dial is in the depressed position (the JOG indicator is lit). Turn the dial to the right to play in the forward direction, and turn it to the left to play in the reverse direction. • In jog mode, the playback speed varies from -1 to +1 times normal speed, according to the rotation speed of the dial. There are no detents. • In shuttle mode, the playback speed varies in the range ±20 times normal speed, according to the angular position of the dial. There is a detent at the center position, for still image playback. • In variable-speed mode, you can make fine adjustments to the playback speed over the range from -2 to +2 times normal speed, according to the angular position of the dial. There is a detent at the center position, for still image playback. Regardless of the playback mode, you will normally press the SHTL/JOG or VAR/JOG button before turning the dial. But it is also possible to put the unit into shuttle, jog, or variable-speed mode simply by turning the dial (by setting setup menu item 101 SELECTION FOR SEARCH DIAL ENABLE to "dial"). 5 Shuttle/jog dial a SHTL/JOG button Press this button, turning it on, to perform shuttle or jog playback with the shuttle/jog dial. b VAR/JOG button Press this button, turning it on, to perform variable-speed or jog playback with the shuttle/jog dial. c JOG indicator Lights in green when the shuttle/jog dial is in jog mode. Note If you do set the above item to "dial", then you should return the shuttle/jog dial to the center position after conducting shuttle or variable-speed playback. If you do not return the dial to the center position, playback in shuttle or variable-speed mode can start because of vibrations during other operations. 20 Front Panel