Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 48
Handling Discs, Discs used for recording and playback, playback
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Chapter 3 Preparations Item F6: PREREAD c) Setting Selects whether to put the unit into preread editing mode. ON: Put the unit into preread editing mode. OFF: Do not put the unit into preread editing mode. Note When you put the unit into preread editing mode, the time data display area in the display on the front panel of the unit is divided into two sections, and "PREREAD," "AUDIO PREREAD," or "VIDEO PREREAD" appears in the lower section, according to the setting of setup menu item 319 PREREAD SELECT. a) Displayed when maintenance menu item M397 PORT CONFIGURATION is set to "VTR Mode." b) The target operation mode is set using setup menu item 108 AUTO EE SELECT. c) Displayed when the optional XDBK-105 is installed and maintenance menu item M397 PORT CONFIGURATION is set to "VTR Mode." Handling Discs Discs used for recording and playback This unit can record and play back the following Professional Disc 1) formats. • PFD23A (capacity 23.3 GB) • PFD50DLA (capacity 50.0 GB) • PFD100TLA (capacity 100 GB) • PFD128QLW (capacity 128 GB) 1) Professional Disc is a trademark of Sony Corporation. Notes • It is not possible to use the following discs for recording or playback: - Blu-ray Disc - Professional Disc for Data • PFD128QLW is a quad-layer Write-Once Professional Disc (hereafter referred to as "quad-layer WO disc"). Pay due attention to the following points. - Even if you delete any files written to the disc, no available storage space will be increased. - Reformatting the disc will not increase the available storage space. - Repetitive file writing will consume the recordable resource space (for writing the disc management data, etc.) on the disc. If no available recordable resource space is left on the disc, file writing may be disabled even with sufficient available storage space remaining. - No file can be written after the disc is finalized. • PFD100TLA and PFD128QLW discs can be used only by XDCAM devices with the XL-QD mark (see the following illustration). They cannot be used by XDCAM devices without this mark. XL-QD mark • Management data and other information are also included in the capacity for each disc. For information about the actual usable capacity, see "Recording/ playback times" (page 141) in the Appendix. 48 Handling Discs