Sony XDSPD2000 User Manual (XDS-PD1000 and XDS-PD2000 Operation Manual for Fir - Page 120
Extended menu operations, To enable display of the extended menu
View all Sony XDSPD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Menu items in the 900s, relating to digital process Item number Item name 965 IMAGE ENHANCER (INPUT UP CONVERTER) a) Sub-item 1 ENH SETTING 2 CONVERT 3 H CROP P 4 L BOX P 5 CNV PROC 6 DETAIL 7 LIMITER 8 CRISP 9 DEPEND 10 H DETL F 11 HV RATIO Settings Set up the operation of the up converter image enhancer for SD input, separately from the settings for playback (menu items 950 to 959). pb: While SD signals are input, make the behavior of the image enhancer of the up-converter follow the settings for playback (menu items 950 to 959). (Settings for sub-items 2 to 11 under menu item 965 become invalid.) input: While SD signals are input, make the behavior of the image enhancer of the up-converter follow the settings for sub-items 2 to 11 under menu item 965 (separate settings during input of SD signals from those during playback). Select the up-converter mode. EDGE CROP [CROP]: Select the edge-crop mode. LETTER BOX [L-BOX]: Select the letter box mode. SQUEEZE [SQUEZ]: Select the squeeze mode. When sub-item CONVERT is set to "CROP", adjust the H-crop (horizontal crop) position for up converter output in edge crop mode. -120 to 0 to 120 When sub-item CONVERT is set to "L-BOX", adjust the vertical location of the position where the picture is cut out for up converter output in letter box mode. -120 to 0 to 120 Select the source picture to use in converting SD to HD. FIELD: Use field pictures. ADAPTIVE [ADAPT]: Frame or field is selected automatically. Adjust the up-converter image enhancer. Set the sharpness of edge enhancement. 00 to 40 to 7F (hexadecimal value) Adjust the up-converter image enhancer. Set the maximum detail level added to emphasize the original signal. 00 to 20 to 3F (hexadecimal value) Adjust the up-converter image enhancer. Set the threshold amplitude at which low amplitude signals are not emphasized. 00 to 08 to 0F (hexadecimal value) Adjust the up-converter image enhancer. Set the luminance range for edge enhancement. 00 to 08 to 0F (hexadecimal value) Adjust the up converter image enhancer. Set the center frequency and frequency properties for edge enhancement. 3.2MHz: 3.2 MHz ±1.1 MHz 4.5MHz: 4.5 MHz ±1.4 MHz 5.0MHz: 5.0 MHz ±0.7 MHz 4.0MHz: 4.0 MHz ±2.0 MHz Adjust the up-converter image enhancer. Set the horizontal/vertical ratio for edge enhancement. 00 to 03 to 07 (hexadecimal value) a) Not displayed when the unit is in 23.98P mode. b) When the optional PDBK-202 is installed c) Not displayed when the unit is in 720P mode. Extended menu operations The extended menu can be used with the same procedures as in the basic menu. However, since with the factory default settings the extended menu is not displayed, it is first necessary to enable display of the extended menu. To enable display of the extended menu Proceed as follows to use the maintenance menu. 1 Holding down the PAGE/HOME button and the SHIFT button, press the MENU button. Chapter 7 Menus 120 Setup Menu