ZyXEL V630 User Guide - Page 121
Note: The values for the WEP keys must be set up exactly the same
View all ZyXEL V630 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Chapter 11 WLAN Profile Table 98 WLAN LABEL DESCRIPTION Key Index Select a default WEP key to use for data encryption. The key displays in the adjacent field. Encryption Key Enter the WEP key in the field provided. If you select 64 Bits in the WEP field. Enter either 10 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 11AA22BB33) for HEX key type. or Enter 5 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey) for ASCII key type. If you select 128 Bits in the WEP field, Enter either 26 hexadecimal digits in the range of "A-F", "a-f" and "0-9" (for example, 00112233445566778899AABBCC) for HEX key type or Enter 13 ASCII characters (case sensitive) ranging from "a-z", "A-Z" and "0-9" (for example, MyKey12345678) for ASCII key type. User Name Password EAP Type IP Setting IP Address Subnet Mask Default Gateway DNS PPPoE Username Password SIP Profile Apply Delete Reset Note: The values for the WEP keys must be set up exactly the same on all wireless devices in the same wireless LAN. ASCII WEP keys are case sensitive. When using WPA or WPA2, enter your user name here. When using WPA or WPA2, enter your password here. When using WPA-EAP or WPA2-EAP, select the type of EAP authentication that the wireless network uses (or select Auto). Select DHCP if you do not have a fixed IP address to use. Select Static if you were given a fixed IP address information to use. Then fill in the IP Address, Subnet Mask, Default Gateway and DNS fields. Select PPPoE if the V630 needs to use a PPPoE account. You will also need a PPPoE user name and password to use this. If you set the IP Setting to Static, enter the V630's IP address here. If you set the IP Setting to Static, enter the V630's subnet mask here. If you set the IP Setting to Static, enter the IP address of the default gateway here. The default gateway is the device on the network that your V630 uses to access other networks (like the Internet). If you set the IP Setting to Static, enter the DNS (Domain Name System) server your V630 uses here. If you set the IP Setting to PPPoE, enter the user name for the PPPoE account here. If you set the IP Setting to PPPoE, enter the password for the PPPoE account here. Select the profile of SIP settings to use with this WLAN profile. Click Apply to save your changes back to the V630. Click Delete to remove the profile. Click Reset to return the screen to the most recently saved settings. V630 User's Guide 121