ZyXEL V630 User Guide - Page 142

V630 Web Configurator Access and Login, Login

Page 142 highlights

Chapter 17 Troubleshooting 2 Make sure the keypad is unlocked. Press # and the Left key to unlock it. 17.2 V630 Web Configurator Access and Login  I forgot the IP address for the V630. 1 Check the IP address the V630 is using in the Setup > Information > TCP/IP LCD menu. 2 Set a static IP address for the V630 in the Network > WLAN Profiles > Profiles List > Edit > IP Setting menus (see Section 6.12 on page 76).  I forgot the password. 1 The default user password is password. The default administrator password is admin. 2 If this does not work, you have to reset the device to its factory defaults. See Section 5.18 on page 59.  I cannot see or access the Login screen in the web configurator. 1 Before you can access the web configurator, you must enable it in the Menu > Setup > Phone Setting > Web Configurator LCD menu. 2 Make sure you are using the correct IP address. • Check the IP address the V630 is using in the Setup > Information > TCP/IP LCD menu. • If you changed the IP address (Section 16.1 on page 139), use the new IP address. 3 Check that the phone is on and connected to an AP. You should see the wireless signal icon. 4 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java enabled. See Appendix C on page 189. 5 Make sure your computer is in the same subnet as the V630. See Appendix A on page 153 and Appendix D on page 197. (If you know that there are routers between your computer and the V630, skip this step.) 6 If the problem continues, contact the network administrator or vendor.  I can see the Login screen, but I cannot log in to the V630. 142 V630 User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220

Chapter 17 Troubleshooting
V630 User’s Guide
142
2
Make sure the keypad is unlocked. Press
#
and the
Left
key to unlock it.
17.2
V630 Web Configurator Access and Login
I forgot the IP address for the V630.
1
Check the IP address the V630 is using in the
Setup
>
Information
>
TCP/IP
LCD
menu.
2
Set a static IP address for the V630 in the
Network
>
WLAN Profiles
>
Profiles List >
Edit > IP Setting
menus (see
Section 6.12 on page 76
).
I forgot the password.
1
The default user password is
password
. The default administrator password is
admin
.
2
If this does not work, you have to reset the device to its factory defaults. See
Section
5.18 on page 59
.
I cannot see or access the
Login
screen in the web configurator.
1
Before you can access the web configurator, you must enable it in the
Menu > Setup >
Phone Setting > Web Configurator
LCD menu.
2
Make sure you are using the correct IP address.
Check the IP address the V630 is using in the
Setup
>
Information
>
TCP/IP
LCD
menu.
If you changed the IP address (
Section 16.1 on page 139
), use the new IP address.
3
Check that the phone is on and connected to an AP. You should see the wireless signal
icon.
4
Make sure your Internet browser does not block pop-up windows and has JavaScripts
and Java enabled. See
Appendix C on page 189
.
5
Make sure your computer is in the same subnet as the V630. See
Appendix A on page
153
and
Appendix D on page 197
. (If you know that there are routers between your
computer and the V630, skip this step.)
6
If the problem continues, contact the network administrator or vendor.
I can see the
Login
screen, but I cannot log in to the V630.