HP Designjet T2300 HP Designjet T2300e MFP - User's Guide: English - Page 181
Align the printheads, Reinsert printheads procedure
View all HP Designjet T2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 181 highlights
8. Plug in and switch on the product. Ink system issues 9. Turn the product on using the Power key. Align the printheads Precise alignment between printheads is essential for accurate colors, smooth color transitions and sharp edges in graphical elements. Your printer has an automatic printhead alignment process which runs whenever a printhead has been accessed or replaced. In cases where the paper has jammed or you are experiencing problems with color accuracy, see Color management on page 87; you may need to align the printheads. NOTE: If the paper has jammed, it is recommended that you reinsert the printheads and initiate the realignment procedure by pressing , then , then Image Quality Maintenance > Align printheads. CAUTION: Do not use transparent or semi-transparent paper to align the printheads. Reinsert printheads procedure 1. If the realignment process is running and the wrong paper is loaded, press on the front panel. CAUTION: Do not print if the realignment process has been canceled. You can restart the alignment by pressing , then , then Image Quality Maintenance > Align printheads. 2. Load the paper you wish to use, see Printer paper handling on page 41. You can use a roll that is at least 610 mm (24 in) wide or a cut sheet that is A2 landscape or larger. CAUTION: Do not use transparent or semi-transparent paper to align the printheads. 3. Remove and re-insert all the printheads, see Remove a printhead on page 131 and Insert a printhead on page 134. This starts the printhead alignment procedure. ENWW Align the printheads 173