HP Designjet T2300 HP Designjet T2300e MFP - User's Guide: English - Page 81
Put job on hold, Optimal, Setup, Printing preferences, Paper options, switching options
View all HP Designjet T2300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Printing ● Load two rolls of paper suitable for your jobs. If the printer finishes one roll, it will automatically switch to the other. ● Check that you have paper wide enough to print all of your jobs. Any jobs that are too wide may be put "on hold for paper" if the paper mismatch action is set to Put job on hold (see Paper mismatch action on page 32). ● Check the ink levels remaining in your ink cartridges. ● When you have submitted your print jobs, you can use the Embedded Web Server from a remote location to monitor their status. ● Drying time should be set to Optimal. ● Press , then , then Setup > Printing preferences > Paper options > Roll switching options > Minimize roll changes or Use roll with less paper. We recommend the following settings, depending on the paper type and what kind of prints you are making. Table 7-1 Recommended settings for unattended printing Print type Print mode MaxDetail Drying time Lines Normal Off Optimal Lines and fills Normal On Optimal Maps Best On Renderings, Best On photographs Optimal Optimal Paper types Coated, Bond, Heavyweight Coated, Glossy Coated, Bond, Heavyweight Coated, Glossy Coated, Heavyweight Coated, Glossy Coated, Heavyweight Coated, Glossy ENWW Advanced print settings 73