Kyocera ECOSYS FS-C8650DN FS-C8650DN Operation Guide - Page 156

Operation Panel Duplex (Setting the duplex printing) Paper types that can be used for duplex printing are types that can be fed from the paper cassette. Note Transparencies, labels, vellum, envelopes, cardstock, coated, and Heavy 5 (257 g/m2) or heavier paper cannot be used for duplex printing. (Refer to Media Type Set. on page 6-18.) Binding Modes Binding refers to the manner in which printed pages of paper are joined together (by gluing, stitching, etc.) in book form. The two possible types of binding are: Bind Long Edge, in which pages are joined together along their long edge; and Bind Short Edge, in which they are joined together along their short edge. In selecting a binding type, you must also consider the orientation of the printed page. You can use Bind Long Edge or Bind Short Edge with either landscape or portrait printing. Depending on the binding type and print orientation, the duplexer provides four types of binding. These are: (1) portrait, Bind Long Edge, (2) portrait, Bind Short Edge, (3) landscape, Bind Long Edge, and (4) landscape, Bind Short Edge. The figure below shows these binding methods. (1) Portrait, Bind Long Edge (2) Portrait, Bind Short Edge (3) Landscape, Bind Long Edge Landscape, Bind Short Edge (4) Duplex: a b *1***O*f**f 2 Bind Long Edge 3 Bind Short Edge 1 In the Print Settings menu, press U or V to select Duplex. 2 Press [OK]. The Duplex screen appears showing the list of available duplex printing modes. 3 Press U or V to select the desired duplex printing mode. The message display toggles through the following: Off (default) Bind Long Edge Bind Short Edge Selecting Off disables duplex printing. 4 Press [OK]. The duplex printing mode is set and the Print Settings menu reappears. 6-30