Kyocera ECOSYS FS-C8650DN FS-C8650DN Operation Guide - Page 161

Operation Panel EcoPrint (Selecting the EcoPrint mode) By enabling EcoPrint mode, you can minimize the amount of toner used during printing. Because images printed in this mode may be slightly coarser than those printed in standard resolution, you should use EcoPrint for test prints or other situations where high-quality prints are not required. Use the procedure below to select EcoPrint mode. The default setting is Off. 1 In the Print Quality menu, press U or V to select EcoPrint. EcoPrint: a b *1***O*f**f 2 On 2 Press [OK]. The EcoPrint screen appears. 3 Press U or V to select the EcoPrint mode. 4 Press [OK]. The EcoPrint mode is set and the Print Quality menu screen reappears. Toner SaveLevel (Selecting the Toner SaveLevel) Select the default Toner SaveLevel. One of five levels [1] - [5] can be set. Note Raising the level reduces toner consumption, but image quality falls. Toner Save Level: a b *1***1*(**L*o*w 2 2 3 3 1 In the Print Quality menu, press U or V to select Toner Save Level. 2 Press [OK]. The Toner Save Level screen appears. 3 Press U or V to select the Toner SaveLevel mode. 4 Press [OK]. The Toner SaveLevel mode is set and the Print Quality menu screen reappears. Gloss Mode (Setting gloss mode) This feature can be used to set the glossiness of printed matter. 1 In the Print Quality menu, press U or V to select Gloss Mode. Gloss Mode: a b *1***O*f**f 2 On 2 Press [OK]. The Gloss Mode screen appears. 3 Press U or V to select whether Gloss Mode is enabled. 4 Press [OK]. The Gloss mode is set and the Print Quality menu screen reappears. 6-35