Kyocera ECOSYS FS-C8650DN FS-C8650DN Operation Guide - Page 199

Operation Panel Auto Panel Reset (Auto panel reset setting) The Auto Panel Reset function automatically restores the default settings if the panel is not used for a set time. The default setting is On. For setting the time until the panel is automatically reset, refer to PanelReset Timer (Setting the panel reset timer) on page 6-73. Auto Panel Reset: a b 1 Off *2***O*n 1 In the Timer Setting menu, press U or V to select Auto Panel Reset. 2 Press [OK]. The Auto Panel Reset screen appears. 3 Press U or V to select whether Auto Panel Reset is enabled. 4 Press [OK]. The Auto Panel Reset setting is set and the Timer Setting menu reappears. PanelReset Timer (Setting the panel reset timer) When Auto Panel Reset is set to On, this sets the time until the panel is automatically reset after the user stops using the panel. The default setting is 90 seconds. PanelReset Timer: a b (5 - 495) /90-sec. 1 In the Timer Setting menu, press U or V to select PanelReset Timer. 2 Press [OK]. The PanelReset Timer screen appears. 3 Use the numeric keys to set the panel reset time. 4 Press [OK]. The panel reset time setting is stored and the Timer Setting menu reappears. Low Power Timer (Low Power Mode timer timeout time) You can adjust the length of time the printer waits before entering Low Power Mode in the absence of a print job. The printer reverts to normal operation mode when the printer receives a print job or any button is pressed on the operation panel. The default time is 5 minutes. Low Power Timer: a b (1 - 240) /*5-min. 1 In the Timer Setting menu, press U or V to select Low Power Timer. 2 Press [OK]. The Low Power Timer screen appears. 3 Use the numeric keys to set the low power time. 4 Press [OK]. The low power time setting is stored and the Timer Setting menu reappears. 6-73