Kyocera ECOSYS FS-C8650DN FS-C8650DN Operation Guide - Page 281
Print Quality Problems, Drum Refresh]
View all Kyocera ECOSYS FS-C8650DN manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 281 highlights
Troubleshooting Print Quality Problems The tables and diagrams in the following sections define print quality problems and the corrective action you can conduct to solve the problems. Some solutions may require cleaning or replacing parts of the printer. If the suggested corrective action will not solve the problem, call for service. Printed Results Blank sheets are ejected. Corrective Action Check that the settings of the application software. Reference Page - 2 or more sheets are overlaps when ejected. (multi feed) Load the paper correctly. 2-22 2-28 Printouts are wrinkled. Printouts are curled. Clean the paper separator. Turn the orientation 180 degrees around in which the paper is positioned. Replace the paper with new paper. Turn the orientation 180 degrees around in which the paper is positioned. Replace the paper with new paper. 7-15 2-22 2-28 2-22 2-28 Printouts are totally too light. Replace the paper with new paper. 2-22 2-28 Select appropriate density level. - Shake the toner container from side to side several times. 7-2 Replace the toner container. Disable EcoPrint mode. 6-11 Run [Drum Refresh]. 6-128 Make sure the paper type setting is correct for the paper being used. 6-21 6-23 8-3