Kyocera ECOSYS FS-C8650DN FS-C8650DN Operation Guide - Page 205

Operation Panel Clear Timer Set the time until manual stapling mode is automatically cancelled. 1 In the Manual Staple menu, press U or V to select Clear Timer. Clear Timer: a b (5 - 60) /5-sec. 2 Press [OK]. The Clear Timer screen appears. 3 Use the numeric keys to set the clear time. The setting range is 5 to 60 seconds (5-second increments). 4 Press [OK]. The clear time setting is stored and the Manual Staple menu reappears. Staple Position Set the default Staple Position. A4 Long Edge Letter Long Edge Staple on the long side of A4 size. Staple on the long side of letter size. Staple Position: a b *1**A*4**L*o*n*g**E*d*g*e****** 2 Letter Long Edge 1 In the Manual Staple menu, press U or V to select Staple Position. 2 Press [OK]. The Staple Position screen appears. [ Exit ] 3 Press U or V to select the desired staple position. 4 Press [OK]. The Staple Position is set and the Manual Staple menu reappears. TonerAlert Level (Setting for the alert level for toner addition) This sets the toner addition alert level displayed. 1 In the Device Common menu, press U or V to select TonerAlert Level. Login User Name: O b Login Password: [ Login ] 2 Press [OK]. The Login screen appears. Note When user login administration is set: • When logged in as an administrator, the log in screen is not displayed and the TonerAlert Level menu screen is displayed. • The setting is not possible when logged in as anyone other than an administrator. Log in again as an administrator. 6-79