Kyocera ECOSYS FS-C8650DN FS-C8650DN Operation Guide - Page 168

Operation Panel IP Address (IP address setting) Set the IP addresses. Note When you enter the IP address, be sure to set the DHCP setting to Off. IP Address: a b /**0. 0. 0. 0 1 In the IPv4 Setting menu, press U or V to select IP Address. 2 Press [OK]. The IP Address screen appears. 3 Use the numeric keys to set the IP address. You can set any value between 000 and 255. Increase or reduce the figures by pressing U or V. Use Y and Z to move the position being entered, which is shown highlighted. 4 Press [OK]. The IP address is stored and the IPv4 Setting menu reappears. Subnet Mask (Subnet mask setting) Set the IP subnet mask. Note When you enter the subnet mask, be sure to set the DHCP setting to Off. Subnet Mask: a b /255.255. 0. 0 1 In the IPv4 Setting menu, press U or V to select Subnet Mask. 2 Press [OK]. The Subnet Mask screen appears. 3 Use the numeric keys to set the subnet mask. You can set any value between 000 and 255. Increase or reduce the figures by pressing U or V. Use Y and Z to move the position being entered, which is shown highlighted. 4 Press [OK]. The subnet mask setting is stored and the IPv4 Setting menu reappears. 6-42