Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 106

Selecting single color copying When [Single Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] key. Color Mode OK Single Color OK R(Red) C(Cyan) G(Green) M(Magenta) B(Blue) Y(Yellow) Selecting 2 color copying When [2 Color] is selected for the color mode, the following screen appears. Touch the desired color and touch the [OK] key. Color Mode OK 2 Color OK Select a color other than black. R(Red) C(Cyan) G(Green) M(Magenta) B(Blue) Y(Yellow) • When auto mode is used, there may be some originals for which switching between color and black & white does not take place correctly. In this event, press the [COLOR START] key ( ) or the [BLACK & WHITE START] key ( ) as appropriate to manually switch between color and black & white. • Copying takes place in black & white when the [BLACK & WHITE START] key ( mode setting. ) is pressed, regardless of the color System Settings (Administrator): Color Mode This is used to change the default color mode setting. System Settings (Administrator): Detect Standard in Auto Color Mode When the color mode is set to auto, the discrimination point for detecting whether originals are color or black and white can be set to one of 5 levels. 25