Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 73
Replace the cleaning tool., Close the front cover lower., Align the holder with the hole in the center
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Replace the cleaning tool. (1) Point the cleaner up and hook the end of the tool (the end without the cleaner) onto the holder on the right. (2) Align the holder with the hole in the center of the cleaning tool and slowly press up from below. 9 (3) Fit the holder into the hole in the tip (the end with the cleaner) of the cleaning tool. Close the front cover (lower). 10 73
73
9
Replace the cleaning tool.
(1)
Point the cleaner up and hook the end of the
tool (the end without the cleaner) onto the
holder on the right.
(2)
Align the holder with the hole in the center
of the cleaning tool and slowly press up
from below.
(3)
Fit the holder into the hole in the tip (the end
with the cleaner) of the cleaning tool.
10
Close the front cover (lower).