Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 44

3 ORIGINALS This chapter explains how to place originals in the automatic document feeder and on the document glass. PLACING THE ORIGINAL PLACING ORIGINALS IN THE AUTOMATIC DOCUMENT FEEDER This section explains how to place originals in the automatic document feeder. Allowed original sizes Minimum original size Maximum original size Standard sizes (Minimum size that can be automatically detected) 8-1/2" (height) x 5-1/2" (width) A5: 210 mm (height) x 148 mm (width) Non-standard sizes (Minimum size that can be specified manually) 5-1/8" (height) x 5-1/2" (width) 131 mm (height) x 140 mm (width) Standard sizes (Maximum size that can be automatically detected) 11" (height) x 17" (width) A3: 297 mm (height) x 420 mm (width) 12" x 18" size paper (A3W) cannot be used. Non-standard sizes (Maximum size that can be specified manually) Copy mode: 297 mm (height) x 432 mm (width) Image send mode: 11" (height) x 31-1/2" (width) 297 mm (height) x 800 mm (width) When a non-standard size original is placed in copy mode, see "SPECIFYING THE ORIGINAL SIZE" in the Copier Guide. When a non-standard size original is placed for fax or scanner transmission, see "IMAGE SETTINGS" in the Facsimile Guide or Scanner Guide. Allowed original weights 1-sided scanning: 9 lbs. to 34 lbs. (35 g/m2 to 128 g/m2) 2-sided scanning: 15 lbs. to 34 lbs. (50 g/m2 to 128 g/m2) To scan originals from 9 lbs. to 14 lbs. (35 g/m2 to 49 g/m2), use "Slow Scan Mode" in the special modes. Scanning without using "Slow Scan Mode" may result in original misfeeds. When "Slow Scan Mode" is selected, automatic 2-sided scanning is not possible. Make sure an original does not remain on the document glass. Open the automatic document feeder, make sure that an 1 original is not on the document glass, and then gently close the automatic document feeder. 44