Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 193
Load 12 x 18 A3W paper., Press the [COLOR START] key, or the [BLACK & WHITE START] key
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 193 highlights
4 or 5 To cancel scanning and copying... Press the [STOP] key ( ). Load 12" x 18" (A3W) paper. • Pull out the extension tray, adjust the guides to the width of 12" x 18" (A3W) paper, and place the paper in the bypass tray. After loading the paper, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY" (page 41). • To load 12" x 18" (A3W) paper in tray 3, tray 4, or the large capacity tray (MX-LCX3), see "2. LOADING PAPER" in the User's Guide. After loading 12" x 18" (A3W) paper in one of the above trays, select the tray as explained in "PAPER TRAYS" (page 14). Press the [COLOR START] key ( ) or the [BLACK & WHITE START] key ( ). Copying will begin. If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original. • The original must be placed on the document glass. • The copy ratio is 100% when this function is used. The ratio cannot be changed. • The punch function cannot be used. To cancel 11x17 Full Bleed... Touch the [11x17 Full Bleed] key in the screen of step 3 so that it is not highlighted. 112