Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 121
Punch function, Original placement orientation for the staple sort and punch functions, Staple sort
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
Punch function If an optional punch module is installed, holes can be punched in output. Paper that can be punched is 7-1/4" x 10-1/2" to 11" x 17" (15 lbs. to 68 lbs.) (B5R to A3 (55 g/m2 to 256 g/m2)). However, 12" x 18" (A3W) sized paper and special media such as transparency film and tab paper cannot be used. [Examples] [Original 1] [Punch positions] [Original 2] [Punch positions] • The saddle stitch and hole punch functions cannot be used together. • Tab paper can be punched manually using the inserter. For more information, see "INSERTER" in the User's Guide. Original placement orientation (for the staple sort and punch functions) When using the staple sort function or the punch function, the original must be placed as shown below to enable stapling or punching in the desired position on the paper. Staple sort Document feeder tray Document glass Punch Document feeder tray Document glass abc abc abc abc abc abc abc abc abc abc 40