Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 694

Initialize and/or Store Settings The current system settings can be stored, previously stored system settings can be retrieved, and the factory default system settings can be restored. Touch the [Initialize and/or Store Settings] key to configure the settings. Restore Factory Defaults This is used to return the system settings to the factory default settings. If you wish to create a record of the current settings before restoring the factory default settings, print the current settings using "List Print (Administrator)" (page 85) in the system settings (administrator). After executing the reset, exit the system settings, turn off the [POWER] key ( ), wait a brief interval, and then turn the [POWER] key ( ) back on to make the factory default settings take effect. Store Current Configuration This is used to store the currently configured system settings. The stored settings will be retained even if the [POWER] key ( ) is turned off. To retrieve the stored settings, use "Restore Configuration" below. Items not stored • Network Settings: These are not stored as unexpected settings may cause damage to the network. • Product Keys: Product Keys are not stored as reissue of keys may be necessary. Restore Configuration Use this to restore settings stored with "Store Current Configuration". The current settings will change to the retrieved settings. 91