Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 619

Paper Tray Settings Paper tray and paper type settings are explained in this section. Touch the [Paper Tray Settings] key to configure the settings. Tray Settings These settings specify the paper type, paper size, and functions allowed for each paper tray. When the [Tray Settings] key is touched, a list appears showing the trays and the current settings. Tray Settings Back Tray 1 Type Size Plain 8-½x11 Change Fixed Paper Side Disable Duplex Disable Staple Disable Punch Copy Print Fax I-Fax Doc. Filing Tray 2 Type Size Plain 8-½x11 Change Fixed Paper Side Disable Duplex Disable Staple Disable Punch Copy Print Fax I-Fax Doc. Filing Settings of each tray Touch the [Change] key in the above screen to change the settings. The following settings can be configured. Item Description Type Select the type of paper that is loaded in the tray. The paper types that can be selected vary by paper tray. For more information, see "Tray Settings" (page 17). To store a new paper type, see "Paper Type Registration" (page 18). Select the paper size from the list. The paper sizes that can be selected vary by tray. The sizes that can be selected may also be restricted by the paper type selected Size above. For more information, see "Tray Settings" (page 17). If the desired size does not appear in the list, select [Custom Size] and directly enter the size (only for tray 3 and the bypass tray). For more information, see "Tray Settings" (page 17). Feeding Approved Job Select the modes that can be used. If there is a function that you do not wish to be used with the selected tray, disable the function. When the "Type" is other than plain paper, recycled paper, colored paper, or a user type, [Fax] and [Internet Fax] cannot be selected. • If the paper size specified here is different from the size of paper that is loaded in a tray, a problem or misfeed may result when printing. To change the paper size in a tray, see "User's Guide". • Paper properties such as "Fixed Paper Side" are automatically set when the paper type is selected. The paper tray properties cannot be changed in this screen. • If "Disabling of Tray Setting" (page 64) has been enabled in the system settings (administrator), the tray settings (except for the bypass tray) cannot be configured. 16