Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 167

PRINTING THE DATE AND A STAMP ON COPIES (Stamp) Use this function to print the date, a stamp, the page number, and text on copies. Six printing positions are available: top left, top center, top right, bottom left, bottom center, and bottom right. The printing positions are separated into areas that are used for the date, page number and text (A below), and areas that are used for a stamp (B below). Top left Top center Top right A B Stamp Date Stamp Page Numbering Text Print area A B A A Maximum number of positions 1 position only 6 positions 1 position only 6 positions Bottom left Bottom center Bottom right • If the selected stamp content of one position overlaps the stamp content of another position, priority will be given in the following order: right side, left side, center. Content that is hidden due to overlapping will not be printed. • Text will be printed at the preset size regardless of the copy ratio or paper size setting. • Text will be printed at the preset exposure regardless of the exposure setting. • Depending on the size of the paper, some printed content may be cut off or shifted out of position. When used in combination with other special modes When Stamp is used in combination with the following special modes, the special modes are reflected in the stamp content. Special Modes Printing Margin Shift Together with the image, the stamp content is shifted the amount of the margin width. Dual Page Copy The stamp is printed on each copy sheet. Pamphlet Copy Book Copy The stamp is printed on each page of the resulting pamphlet or book. Multi Shot Card Shot The stamp is printed on each copy sheet. Covers/Inserts Use the stamp settings to select whether or not the item is printed on inserted covers and inserts. When used in combination with "Erase", "Job Build", "Mirror Image", or "B/W Reverse", the stamp is printed in the set position as usual. 86