Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 28

Gently push tray 1- tray 2 into the machine. Push the tray firmly all the way into the machine. 4 If you loaded a different type of paper than was loaded previously, change the paper type setting as explained in "Paper Tray Settings" in the System Settings Guide. Do not place heavy objects on the tray or press down on the tray. System Settings: Paper Tray Settings Change these settings when you change the size or type of paper loaded in a tray. CHANGING THE PAPER SIZE To change the paper size of tray 1 - tray 2, follow the steps below. This section only explains how to change the paper size. For the procedures for opening/closing the tray and loading paper, see "LOADING PAPER" (page 27). Tray 1 Tray 2 Remove the paper size guide. With the base of the tray pressed all the way down, hold down the hook at the bottom on the paper size guide and pull the paper size guide up slightly. 1 Hook Transparent sheet Paper guide Before changing the paper size of tray 2, raise the paper guide. 28