Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 68
Cleaning The Main Charger Of The, Photoconductive Drum - black drum
View all Sharp MX-6201N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
CLEANING THE MAIN CHARGER OF THE PHOTOCONDUCTIVE DRUM If black lines or colored lines appear even after you have cleaned the document glass and automatic document feeder, use the charger cleaner to clean the main charger that charges the drum. Open the front cover (lower). 1 Open the inner cover. 2 3 4 Charger cleaner 5 Clean the main charger. (1) Slowly pull out the green knob (charger cleaner) as far as it will go. (2) After the green knob (charger cleaner) is pulled out, slowly push it all the way back in. Repeat step 3 with each of the other charger cleaners. There are a total of 3 places to be cleaned in the machine as shown. Close the inner cover. 68
68
CLEANING THE MAIN CHARGER OF THE
PHOTOCONDUCTIVE DRUM
If black lines or colored lines appear even after you have cleaned the document glass and automatic document feeder,
use the charger cleaner to clean the main charger that charges the drum.
1
Open the front cover (lower).
2
Open the inner cover.
3
Clean the main charger.
(1)
Slowly pull out the green knob (charger
cleaner) as far as it will go.
(2)
After the green knob (charger cleaner) is
pulled out, slowly push it all the way back
in.
4
Repeat step 3 with each of the other
charger cleaners.
There are a total of 3 places to be cleaned in the machine as
shown.
5
Close the inner cover.
Charger cleaner