Sharp MX-6201N MX-6201N MX-7001N Operation Manual Suite - Page 62

SHARP OSA Sharp OSA (Open Systems Architecture) is an architecture that enables external applications to be directly connected to a digital multifunction machine over a network. When a digital multifunction machine that supports Sharp OSA is used, the operation panel controls and functions of the machine such as scan send can be linked to an external application. There are two types of external applications: "standard application" and "external account application". An "external account application" is used for centralized account management of a multifunction machine on a network. A "standard application" refers to all other applications. APPLICATION COMMUNICATION MODULE (MX-AMX2) The application communication module is required to use a "standard application" on the machine. When a previously registered standard application is selected in the Web pages of the machine, the machine retrieves the operation screen from the registered URL. Control of the operation screen is performed by the standard application, and Scan to FTP can be executed. Standard application setup To enable a general application in the Web pages of the machine, click [Application Settings] in the administrator menu frame, and then [External Applications Settings] and [Standard Applications]. Configure settings for the standard application in the screen that appears. Selecting a standard application The procedure for selecting a general application that has been enabled in the Web pages of the machine is explained below. COPY IMAGE SEND Ready to scan for copy. DOCUMENT FILING Sharp OSA Touch the [Sharp OSA] key in the mode 0 select keys. Color Mode Full Color 1 Exposure Auto 1. 2. 8½x11 8½x11 3. 11x17 4. 8½x14 Plain 8½x11 Special Modes 2-Sided Copy Output File If no standard applications have been stored in the Web pages, the key cannot be touched. Copy Ratio 100% Original Auto 8½x11 Paper Select Auto 8½x11 Plain Quick File 62